California Air Tools 8010 Ultra-Quiet 60 dB, 1.0 HP, 8-Gallon Steel Tank, Oil-Free Air Compressor (2.2 CFM @ 90 PSI, 120 PSI Max)

Description

Why buy this model: true indoor-friendly noise (~60 dB), durable steel 8-gal tank with wheels, long-life oil-free dual-piston pump (~3,000+ hr), and proven demand across retail channels. Specs verified from CAT’s official datasheet and product page. 

Who it’s perfect for

• Garages, basements, townhomes—anywhere noise control matters (≈60 dB).
• Trim carpenters, DIYers, and small shops running brad/finish nailers, staplers, blow-off, inflation, and airbrushing.
• Users who want low maintenance (oil-free) with a bit more tank capacity than compact 1–2 gal units.
• Key features & benefits

• Ultra-Quiet Operation (~60 dB): run it indoors without the typical compressor roar.
• Oil-Free Dual-Piston Pump (~3,000+ hr): cleaner air to tools and fewer service intervals than many small oil-lubed units.
• 8-Gallon Steel Tank + Wheel Kit (≈48 lb): sturdy, roll-anywhere portability with balanced footprint.
• Low-RPM Motor (1.0 HP running, 1680 RPM): lower heat/wear for longer life; helps keep the unit quiet.
• Solid everyday airflow: ~3.10 CFM @ 40 PSI and ~2.20 CFM @ 90 PSI—ideal for trim tools and routine shop tasks.
• Practical details built-in: dual pressure gauges, quick-connect outlet, thermal overload protection, and 120 PSI max. 

What’s in the box

• California Air Tools 8010 compressor (8-gal steel tank)
• Wheel & handle kit
• Air filter
• Quick-connect outlet (¼″ industrial/universal style) and regulator assembly (installed per guide)
• Owner’s manual & quick-start guide 

Quick setup (2 minutes)

1. Assemble wheel/handle kit; place on a level surface.
2. Verify the drain valve is closed; check fittings.
3. Plug into a dedicated 120 V circuit; avoid long, light-gauge extension cords for best performance.
4. Charge to cut-out, then leak-check with soapy water; adjust the regulator for your tool.
5. Drain the tank after every session (or consider the 8010AD/8010AAD auto-drain variants to automate this).

Best add-ons (increase performance & lifespan)

• Filter-Regulator (FR) or FRL: knocks out moisture and regulates PSI precisely—better finishes and tool life.
• High-flow couplers + 3/8″ hybrid hose: reduce pressure drop and keep nailers snappy.
• Automatic drain kit: reduces moisture-related tank issues if you often forget to drain.

Specifications

• Model: CAT-8010
• Motor: 1.0 HP (running), 2.0 HP (peak), ~1680 RPM (SP-9413 series)
• Tank: 8.0 gal steel with wheel kit; weight ~48 lb; size ≈ L 26″ × W 14″ × H 23″
• Noise: ~60 dB (ultra-quiet)
• Airflow: 3.10 CFM @ 40 PSI; 2.20 CFM @ 90 PSI
• Max Pressure: 120 PSI; duty cycle 70/30 (see CAT’s definition) 
• Power: 110–120 V / 60 Hz, low amp draw 8.5 A; generator min. 2500 W (running) if used off-grid californiaairtools.com 
• Time to fill (0→full): ~165 s; recovery 90→120 PSI: ~60 s (typical)
• Protection & controls: thermal overload protection; dual pressure gauges; regulator; ¼″ industrial/universal quick-connect.
• Warranty: 1-year limited (see included manual).

Common use cases

• Trim/finish nailers, staplers, upholstery tools
• Tire inflation, blow-off cleaning, dust control for tools
• Airbrushing and detail work

For die grinders, HVLP spray guns, or impact wrenches, step up to CAT-10020C / 4620AC / 15020C / 20020 for higher sustained CFM

FAQs

Q1) 8010 vs 8010A vs 8010AAD—what’s different?
8010 = steel tank; 8010A = aluminum tank (lighter, rust-free); 8010AAD = aluminum tank with automatic drain. All share ~60 dB, 1.0 HP pumps. 

Q2) Can I run it on a standard household outlet?
Yes—110/120 V with low 8.5 A draw. Use a dedicated circuit when possible; avoid long, thin extension cords. californiaairtools.com

Q3) What connector/hose should I use?
The outlet uses a ¼″ industrial/universal quick-connect, so pair it with a matching coupler and a quality 3/8″ hybrid hose for minimal pressure drop

Q4) What does 70/30 duty cycle mean here?
CAT defines this as intermediate use during a standard workday—do not let the motor run continuously for more than 60 minutes (2.2 CFM @ 90 PSI for 60 min max). 

Q5) How loud is 60 dB, really?
About normal conversation level—dramatically quieter than typical 85–90+ dB shop compressors. 

Q6) I often forget to drain tanks. What should I buy?
Consider the 8010AD (auto-drain kit) or step to 8010AAD (aluminum + auto-drain). Both help prevent moisture build-up. californiaairtools.com

contact us